16
Window
frame
Bottom
railing
3
1
2
3
To refi t the window:
1. Place the window in its bottom railing.
Ensure to
remove any vermiculite or glass particles in
the railing before installing the window.
2. Push the top of the window frame against the
fi rebox.
3. While you hold it, pull and hook the side levers back
to the window brackets on each side.
4. Apply fi rm hand pressure around the window frame to
ensure the window is sealed tight against the fi rebox.
5.
If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
6. Reinstall the side doors sliding them sideways to
insert their tabs behind the front face of the trim.
7.
Reinstall the barrier screen on the trim.
Hot Glass Warning Plate
WARNING
Failure to install the window correctly can
leak carbon monoxide, aff ect the performance
of the fi replace, damage components, cause
overheating resulting in dangerous conditions.
Damage caused by incorrect window installa-
tion is not covered by the Valor warranty.
!
DANGER
The window unit must be correctly installed,
fastened and sealed after servicing or serious
bodily injury and/or damage to the appliance
may result.
To ensure a safe operation:
•
Double-check that the bottom of the window
frame is correctly installed in the bottom
support railing;
•
Verify that the levers are hooked properly to
the window tabs then;
•
Pull out the top of the window and release it
to insure the springs return it;
•
Ensure the window is sealed before operation.
!
Servicing & Maintenance
WARNING
FOR SAFETY PURPOSE, ensure the barrier
screen is re-installed on the fi replace front after
maintenance.
!
OWNER’S
INFORMATION
Содержание H6 Series
Страница 78: ......
