INSTALLER’S GUIDE
Page
14
6.3
Installation of the
burner unit
6.3.1
Prior to installation of
the burner the coal matrix
support plate must be fitted
(See figure 4). Two self-
tapping screws retain the
plate.
6.3.2
Burner Positioning
•
The two tags at the side
of the burner can be
folded against the side of
the burner tray. This may be
required for installations where
the width of the fireplace
opening is restricted (See figure
5)
•
Place the burner unit centrally
within the fireplace opening.
Position the burner to the rear of
the opening, this may be
extended forward providing
the front of the burner tray
does not protrude beyond the
front plane of the fireplace
opening (See figure 6).
6.3.3
Locating the burner.
Method 1.
•
Place the burner assembly in
position.
•
Mark on the hearth the
position of the fixing holes at
the bottom front of the front
leg.
•
Remove the burner assembly.
Figure 6. Burner Positioning
Figure 5. Burner tags.
Figure 4. Fitting the coal support plate
