INSTALLER’S GUIDE
Page
24
Install the 16 loose pebbles
as follows. The underside
of each pebble is marked
with a number ‘1’ to ‘16’
and an arrow.
6.
The pebbles should be
positioned so that the
arrows always point
towards the back of the
fireplace opening. When
located into position the
stem of each arrow should
be at 90° to the rear of the
fireplace opening (See
figure 26).
7.
Hold pebble ‘1’ upright
with the arrow pointing to
the top. Locate
pebble ‘1’ as
shown in figure
26. It should lie
on top of the left
hand front
pebbles.
8.
Hold Pebble
‘2’ upright with
the arrow
pointing to the
top. Locate Pebble ‘2’ as shown in figure 27. It should lie on top of the right
hand front pebbles
9.
This will complete the front row of pebbles.
Figure 27. Front row “Pebble 2”
Figure 26.Front Row “Pebble 1”
