manualshive.com logo in svg

Valor Fires 954, Инструкция для установщика и владельца

Поделиться
Скачать
Valor Fires 954 Скачать руководство пользователя страница 52

SAFETY

Do 

have the fire installed by a competent person. In the United Kingdom, installation

must be in accordance with the latest edition of the Gas Safety (installation & use) 
Regulations. In the Republic of Ireland, installation must be in accordance with all 
national and local regulations in force. 

Do 

have the chimney swept prior to installation if it was previously used for solid fuel.

Do 

have the fire installed in accordance with the installer guide.

Do

provide a minimum clearance of 750mm from the base of the fireplace opening to

any shelf made of wood or other combustible material where the shelf is not more
than 150mm deep. For a shelf deeper than 150mm, add 12.5mm to the clearance for
every 25mm of additional shelf depth (See Figure 1).

Page 52

© 

Baxi Heating U.K. Limited 2010.

OWNER GUIDE

IF YOU SMELL GAS

 

DON’T SMOKE.

 

EXTINGUISH ALL NAKED FLAMES.

 

DON’T TURN ELECTRICAL SWITCHES ON OR OFF.

 

TURN OFF THE GAS SUPPLY AT THE METER OR TANK AS APPROPRIATE.

 

OPEN DOORS AND WINDOWS TO GET RID OF THE GAS.

 

IMMEDIATELY CALL THE GAS EMERGENCY SERVICE FROM A 

NEIGHBOURS PHONE - SEE YOUR LOCAL TELEPHONE DIRECTORY.

Figure 1. Combustible shelf clearances

Содержание 954

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды