Valor Fires 824 Blenheim Longlite, Инструкция для установщика и владельца

Страница: 22 / 32

3. OPERATING THE FIREFRONT
Important Safety.
Never cover the firefront or obstruct the openings at the base of the firefront,
this could cause overheating and consequent risk of fire.
What are the Fireslide control positions for?
The firefront is operated by the Fireslide control located on the upper right hand side
of the firefront.
Fireslide Position
OFF The flame effect and heater are OFF.
Only the flame effect operates
1kW fan heat setting and flame effect.
2kW fan heat setting and flame effect.
What is the variable energy control knob for?
The firefront has a variable energy control located below the
hood on the right hand side of the firefront.
The variable energy control will only work when the Fireslide
control is set at the 2kW setting. If the room requires maximum
heat, rotate the control fully clockwise. For less heat rotate the
control counterclockwise until the required heat setting is achieved. When operating
the variable energy control will operate between the 1kW and 2kW settings. Turning
the knob fully counterclockwise will switch the variable energy function off.
Page 22
©
Baxi Heating U.K. Limited 2010.
OWNER GUIDE
Figure 1. Variable energy control.
Figure 2.