Valor Fires 824 Blenheim Longlite, Инструкция для установщика и владельца

Страница: 11 / 32

Removing the cable guide.
1.
Before removing the cable guide please note that
the wider part of the cable guide is on the outer
edge of the base (See figure 3 - Item 1).
2.
To remove the cable guide push and lift the tab
on the bottom. The bottom of the cable guide will
open (See figure 3 - Item 2).
3.
Lift the electric cable clear of the cable guide.
4.
Hold the bottom of the cable guide close to the
firefront then gently pull the cable guide away from
the rectangular slot (See figure 3 - Item 3).
Fitting the cable guide.
When fitting the cable guide please remember that
the wider part of the cable guide has to be fitted
against the outer edge of the base (See figure 3-
Item 1).
1.
Gently pinch the sides of the cable guide (See
figure 3 - Item 4) and push the cable guide into the
required rectangular slot.
2.
Place the electrical cable into the guide and close
the top of the cable guide.
Page 11
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 3. Removing and
positioning the cable guide.
Item 1
Item 2
Item 3
Item 4