Valor Fires 824 Blenheim Longlite, Инструкция для установщика и владельца

Страница: 14 / 32

5.
At the top of the firefront there
are four small holes, two each
side of the firefront. From the
front of the firefront, thread
about 50mm of the wire into the
outside small hole on the right
side of the firefront (See point 1
- figure 8).
6.
Thread the other end of the
wire through the remaining small
hole to the left. Continue to push
the wire through this hole until
there is only a small loop of wire
at the front of the firefront (See
point 2 - figure 8).
7.
At the back of the firefront
there will be a long piece and a
short piece of wire coming
through the two holes. Hold the
short piece and give the long piece a gentle tug. This will secure the wire. Take the
long piece and thread this through the bracket located at the top centre of the boiler
(See figure 8).
8.
From the back of the firefront thread the long piece of wire through the inner small
hole on the left hand side of the firefront (See figure 8).
9.
Locate the firefront in the fireplace opening, then from the front of the firefront,
gently pull the wire on the right hand side to gather up the excess until the firefront is
secure. Thread the wire through the remaining small hole to lock the wire and firefront
in place (See point 4 - figure 8).
Page 14
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2010.
Figure 8. Wire fix