manufacturers replacement part should be fitted. The individual A.S.D components
are not replaceable.
3.21
A fireguard complying with BS 8423 should be fitted for the protection of young
children, the elderly, the infirm and pet animals.
4. PACK CONTENTS
(See figure 6)
1
Hotbox and burner assembly
1
Fascia
1
Literature Pack
1
Burner tray trim
1
Loose parts pack including: -
1
Length of self-adhesive foam seal
2
Fire Retaining cables
2
Cable adjusters
1
Flue restrictor
2
No.8 x 3/8” tapping screws for securing the flue restrictor
2
M4 x 10 screws for securing the fascia
2
Eyebolts
2
Fibre plugs
1
Strip of floor sealing tape
1
Inlet “T” connector including pressure test point
1
Nut and olive for 8mm inlet pipe
1
Grommet for rear of hotbox.
1
Remote control handset
4
‘AA’ Batteries
1
‘PP3’ Battery
1
Ceramic fuel effect pack (Not shown)
Remove all the items carefully to prevent damage. Take special care when handling
the ceramic components. Some items may be contained in the packaging fitments -
Examine the packaging carefully before discarding. Check that all the items are
present and undamaged.
Pa ge 1 5
INSTALLER GUIDE
©
Baxi Heating U.K. Limited 2007.
Содержание 752
Страница 17: ...Page 16 INSTALLER GUIDE Baxi Heating U K Limited 2007 Figure 6 Pack contents...
Страница 34: ...Page 33 INSTALLER GUIDE Baxi Heating U K Limited 2007...
Страница 39: ...APPLIANCE DIMENSIONS Page 38 Baxi Heating U K Limited 2007 Figure 1 Appliance dimensions OWNER GUIDE...
Страница 49: ...Baxi Heating U K Limited 2007...