Valmet Flowrox FXM Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 21 / 46

21
4FXM70EN - 8/2022
Select ←Back on following screens to move back up to desired
menu location.
N OTE: For features in Set Diagnostics Username and
Diagnostics Use, please contact Valmet Flow Control Oy
Diagnostics Use
Press
MENU
button to enter menu structure for setting up
pump.
Select
Configuration
and Press ENTER button.
Select Activate Diagnostics and Press ENTER button.
Select
Yes
at bottom of list to confirm your selection. Press
ENTER button.
Select ←Back on following screens to move back up to desired
menu location.
Display Rate (Units of Measure)
By default, pump will display %Speed (motor speed) and
RPM . It is recommended you select an additional Display
Rate
. After selecting another
Display Rate
(such as ML/min),
pump will still display %Speed and RPM along with your
selected Display Rate.
Press MENU button to enter menu structure for setting up
pump.
Select Configuration and Press ENTER button.
Select
Display Rate
and Press
ENTER
button.
Select your desired Display Rate (unit of measure).
Note: %Speed and RPM will always be active and available to
view when pump is in operation.
Select
OK
at bottom of list to confirm your selection and to
return back to previous screen. Press ENTER button.
Select
←Back
on following screens to move back up to desired
menu location.