Valloy Incorporation.
Any-002
User Manual
any-002
© 2015 Valloy Inc. All rights reserved.
Rev 1.0
– 2015.10
27 of 68
① GAP sensing mode LED
② Front black mark sensing mode LED
③ Rear black mark sensing mode LED
④ Sensing check LED: LED is on when sensor is located on gap of pre-cut or black mark
⑤ SET switch: It supports 3 movements.
-Pressing for one second: It changes sensing mode. It also saves teaching value while using
automatic sensing mode.
-Pressing for 3 seconds: Selected sensing mode enters ‘Auto Teaching’ mode.
-Pressing for 5 seconds: Sensor is initialized.
⑥ Sensor module fixing knob
2-1.2.2 How to tune the sensor
- Before using the installed sensor(media), you have to check the sensor works normally on Pre-
cut media.
