Skipping a measurement
If you skip one or several measurements, the
device will determine your fertility based on
existing data. The more regularly you measure
your temperature, the better the device will
analyse your cycle and the more green days
you will have.
Mini-USB cable
To read out your data, only use devices that
support reading USB «mass storage devices».
Most PCs, laptops, and many tablet computers
will support this function. The USB socket may
only be used for connections with devices of
this type. You may not access pearly
®
while it
is connected to a USB application.
Mono-phases
If you don’t ovulate in a certain cycle, pearly
®
will show this throughout in red.
After the pill
You will have to discontinue taking the pill
before you begin using pearly
®
. The first
bleeding after discontinuing the pill is a
pill-induced withdrawal bleeding. Do not input
«M» in this case.
Travelling/time zones
If travelling to other time zones, you may wish
to set the date and time to the local time. Set
and activate the alarm using the new measure-
ment time. pearly
®
will be ready for measuring
the next morning. The same should be done
after you return home.
Shift work
Set and activate the alarm to the new measu-
rement time. pearly
®
will be ready to measure.
Do likewise at the next change of shift (see p.
11 and 14).
Fever
If the measurement value indicates a fever
(higher than 37.80°C), «F» for fever will be
displayed alternatingly with the measurement
value. Our recommendation is to skip a measu-
rement on the day of a feverous cold, medical
drug consumption, or a party night in order
to avoid atypical values. Important: Do not
use pearly
®
to control your health status, this
should be done with a medical thermometer.
Deleting stored data
It is possible to completely delete all user data
and use the device from anew.
– To do this, press the plus key for 5 seconds to
start the test run.
– During the test run, press all 3 keys simulta-
neously for 5 seconds.
– The display will show L-:09:
– Use the minus key to count down to L-:00.
– You have now completely deleted all your
data. You will hear a tone. The display now
shows the default values, as before you
started the application (temperature 36,65,
day 14 of cycle).
23 –
pearly
