9. INPUTTING MENSTRUATION DATA
Just enter «M» on all days that your period
lasts, at least on three consecutive days.
Inputting menstruation data after
starting the application
After the measurement process, «M»
(menstruation) will be blinking as the
case may be.
– In case of «M» yes (you have your period),
press the plus key. «M» is on.
– In case of «M» no (you don’t have your
period), press the minus key. «M» disappears.
– A tone confirms the input, the current cycle
day is displayed alternatingly with the mea-
surement value.
Inputting «M»after using the
application for some time
As soon as pearly
®
knows your cycle, the
device will prompt you for «M» on the day «M»
is expected.
– The «M» prompt («M» blinking) begins 2
days before your expected period.
– Once «M» is over, pearly
®
will stop prompt-
ing you for it.
The first bleeding after discontinuing the pill
is a pill-induced withdrawal bleeding, not a
period. Do not input «M» in this case.
Correcting «M»
Erroneous «M» inputs can only be corrected
for the current day and three days before.
To input or correct several «M» days post-hoc,
please always start with the least recent «M»
day (see p. 18).
17 –
pearly
