20
Figure
12
– Alligator type clips
The most common termination is
alligator type clips
.
If this is your choice of leads,
simply connect one clip to one end
of your load and the other clip to the
opposite side of the load.
Figure
13
- Surface type probes
For flat surfaces, you can use
between two different
spring
loaded surface probes
.
If this is your choice of leads,
simply press one probe against one
side of the surface of your load,
making sure that the surface of the
probe is in full contact with the
surface of the load. Press the second
probe against the surface at the
oppose side of your load making
sure that the surface of the probe is
in full contact with the surface of the
load.
Figure
14
- Dual needle type probes
For hard to reach surfaces, Valhalla
Scientific offers three different sets
of
spring loaded dual needle
probes
that differentiate in overall
size and distance between the
needles.
If this is your choice of leads,
simply press both the needles of one
probe against one end of the surface
of your load, press both needles of
the second probe against the surface
at the oppose end of your load.
