20
5.
Optional Features and Accessories
Each 4314Ki Igniter Testers is shipped with a detachable power supply/battery charger (A2) and a set of K
4 wire leads. This section lists several items that may be desirable for special applications.
Options
The 4314Ki comes standard with the Serial Interface and Dual Power Mode switch. However, if required
by the application, one or both features can be removed at the factory.
Accessories
A2: Battery Charger
"A2" is an AC/DC converter 115-240VAC line voltage to 9VDC at 300mA with locking ring, sealed IP68. One
charger is provided as a standard accessory with every 4314Ki.
Replacement Batteries
The rechargeable NiMH batteries installed in the 4314Ki should provide years of trouble-free operation.
Replacement, however, will eventually be necessary. The 4314Ki uses four 1.2V cells installed in a
reusable battery box. When ordering replacement batteries, please specify Valhalla Stock #05-10117,
quantity four (4).
Test Leads
This section details the different test lead sets and connectors available for use with the 4314Ki Igniter
Tester. All cables and test leads are manufactured by Valhalla Scientific Inc. and tested before shipping.
Alligator Clip Type Leads
K: Kelvin Lead Set
"K" is a shielded, 4-wire Kelvin cable set, 48 inches in
length terminated in gold plated alligator clips
(KCS)
.
Option "K" is the recommended general purpose lead
set for most applications.
Figure 3.
KCS: Gold-Plated Clips
"KCS" are gold-plated alligator clips used on the "K" lead
set for 4-wire measurements of smaller components
and leads. Clips open to 1/2 inch and accommodate test
currents of up to 10A.
C: Banana-to-Clip Cable
"C" is a 48" general purpose shielded lead set terminated on one end in dual banana plugs and on the
other end in red and black alligator clips.
Figure 3 – K: Kelvin 4-Wire Lead Set
