21
KK: Heavy-Duty Lead Set
"KK" is a 4-wire Kelvin cable set, 48-inches in length
terminated in heavy-duty gold-plated clamps
.
Figure 4
.
JAWS: Gold-Plated Clamps
"JAWS" are gold-plated heavy-duty clamps. Clamps
open to 2 inches for connection to large motors,
bushings, etc.
Needle Type Probes
MP-1: Kelvin Micro-Probes
"MP-1" is a 48-inch shielded 4-wire Kelvin cable set with a 1A test current capacity employing a set of
Kelvin Micro-Probes. The probes are equipped with spring-loaded stainless-steel tips with 0.05" spacing.
MP-2: Kelvin Mini-Probes
"MP-2" is a 48-inch shielded 4-wire Kelvin cable set with a 1A test current capacity employing a set of
Kelvin Mini-Probes. The probes are equipped with spring-loaded stainless-steel tips with 0.18" spacing.
MP-S: Single Pointed Probe Set
"MP-S" is a 48-inch shielded cable set with a 1A test current capacity employing a set of single pointed
handheld pencil type probes. (2 wires to each point).
Surface Probes
MP-4: Surface Probes
These probes permit rapid, repeatable bonding testing
on a variety of screened or flat surfaces. Test current is
evenly distributed through the probe base while
sensing is accomplished via a spring-loaded center
contact. The target area is 1-inch in diameter.
Figure 5
MP-5: Surface Probes
These probes permit rapid, repeatable bonding testing
on a variety of screened or flat surfaces. Test current is
evenly distributed through the probe base while
sensing is accomplished via a spring-loaded center
contact. The target area is ½ inch in diameter.
Other Lead Sets
BBL: Banana-to-Banana Cable
"BBL" is a 48" shielded cable terminated on both ends in dual stacking banana plugs. This cable may be
used for voltage and current connections to the ohmmeter.
SL-48: Low Thermal Leads
"SL-48" is a 48" shielded lead set terminated in gold-plated spade lugs. This lead set is designed to
eliminate problems caused by thermal EMF's and is rated for the maximum output current of 1A.
Figure 4 - KK: Kelvin 4-Wire Lead Set
Figure 5 - MP-4 Surface Probe
