Valhalla Scientific 4300C, Руководство по эксплуатации

Страница: 35 / 84

33
Run/Hold Function
The Run/Hold function of the 4300C can be
configured in three different ways:
RUN/HOLD
When configured for Run/Hold, pressing the “R
UN
/Hold” key will freeze
the readings on the display. The function window displays “HOLD”. To exit
the hold state, press
“R
UN
/H
OLD
” again, the function window displays
“RUN”.
RUN/PKHI
When configured for Run/PeakHi, pressing the “R
UN
/H
OLD
” key will
activate the Peak-Hi state, the readings on the display will only increment
therefore showing the maximum value measured. The function window
displays “PKHI”. To exit the PKHI state, press
“R
UN
/H
OLD
” again, the
function window displays “RUN”.
RUN/PKLO
When configured for Run/PeakLo, pressing the “R
UN
/H
OLD
” key will
activate the Peak-Lo state, the readings on the display will only decrease
therefore showing the lowest value measured. The function window
displays “PKLO”. To exit the PKLO state, press
“R
UN
/H
OLD
” again, the
function window displays “RUN”.
Configuring the Run/Hold Function
To configure the Run/Hold function:
Press “Func. + Run/Hold”
Select one of the three options by pressing keys 1, 2, or 3 and
press
“Enter” .
The screen will display a brief message, the selection is
stored in memory and the instrument automatically returns
to the previous mode.