Valhalla Scientific 4300C, Руководство по эксплуатации

Страница: 24 / 84

22
For flat surfaces, you can use between two different spring-loaded
surface probes.
If this is your choice of leads, simply press one probe against one side of
the surface of your load, making sure that the surface of the probe is in
full contact with the surface of the load. Press the second probe against
the surface at the opposite side of your load making sure that the surface
of the probe is in full contact with the surface of the load.
For hard-to-reach surfaces, Valhalla Scientific offers three
different sets of spring-loaded dual needle probes that
differentiate in overall size and distance between the needles.
If this is your choice of leads, simply press both the needles of
one probe against one end of the surface of your load, press
both needles of the second probe against the surface at the
opposite end of your load.