Valhalla Scientific 4300C, Руководство по эксплуатации

Страница: 22 / 84

20
Applying Power
Before applying power, please refer to safety precisions at the beginning of this manual.
Turn on the ohmmeter by placing the front panel power switch in the ON position. If the ohmmeter does
not turn on, verify that the instrument is connected to the power line. If line power is not the problem,
remove the power cord and check the line power fuse and the line voltage selection switch settings.
Power-On Default Settings
Once on, the ohmmeter performs its power-on routine.
(Figure 6)
When the power-on routine is finished, the ohmmeter will beep
twice.
The power-on routine will default the ohmmeter’s functions as
described in the Table 5.
Functions Setting
Standard Measurement Mode ON
Voltage Setting 2V
Range 20kΩ
TCM (Temperature Compensation Mode) OFF
HLC (Hi-Lo Comparator Mode) OFF
BCD (binary Coded Decimal Output) OFF
PIM (Printer/Log Mode) OFF
Table 5 - Power-Up Defaults
Figure 6 - Power Up Routine Screen