5. Final adjustments
•
Selection of the vehicle type :
This button is used to set the vehicle type. Make sure that it is set
correctly; a faulty setting can undermine the performance of guideo.
The vehicles are classified according to the height of the camera
module and the vehicle width. Installation height :
Passenger Car : 110 cm ~ 125 cm
SUV1 : 125 cm ~ 145 cm
SUV2 : 145 cm ~ 160 cm
Bus : about 170 cm
Truck : about 195 cm
Press the “vehicle” button on the remote control until the
proper
vehicle type is selected.
•
Adjustment of the camera angle :
The angle adjustment mode helps you install guideo in its exact
position.
Press the “Angle" button on the remote control.
Loosen the screw and carefully adjust the camera by
successive
movements
, until the LED display shows "00:00“, or close value.
Screw back the camera module
Press the “Angle" button again to exit the installation mode.
•
Sélection of the language :
The “L” button is used to change between 3 languages, including
English. The other 2 languages can be selected on a PC by the
guideo manager program.
When pressed once, the current language setting is announced..
“English is selected.” When double-pressed, the
next language is
selected
and announced accordingly.
8/11
Installation guide
