After installation
Troubleshooting
No sound comes out of the device :
Check if the power cable is correctly connected. If the power is not connected,
no display comes on.
Check if all the functions are disabled.
Check if the sound level is minimized. If the sound level is low in noisy
environment, the sound may not be heard.
The Video Box is not saving video images :
The Video Box records video images only if an acceleration greater than 0.4g
occurs in any direction. Please make sure that the sensibility of impact for
video recording is appropriate with the situation (and adjust it with the remote
control).
No warning occurs in case of lane departure :
The Lane Alert and Optilane feature start to operate after 2 seconds of
watching road lines. So after passing crossroads or no-mark region, the
warning will come out after 2 seconds.
If you cross lines again while the warning message is still being given, the
second warning message is deleted.
If the road is narrow, the warning sound comes later for the driver's
convenience.
Check the correct angle set up
Warning occurs without lane departure :
Check the setting of warning timing. If set to earlier modes, the driver may
feel that the warning is too fast or occurs without a line being crossed.
In case of bad weather, roads under construction or roads where lines have
been erased, guideo may not recognize the road lines appropriately.
Beep&Watch system doesn't come on :
Check how the LED display is set.[ LED display shows "00:00".]
This function is enabled when the vehicle is stopped. Make sure the vehicle
is completely stopped.
?
?
?
?
?
10/11
