Installation guide
7/11
•
Check that the camera module switches on and off
with the engine.
•
Check that the turn indicators are connected
properly.
A "left turn indicator" and "right turn indicator" signal should be displayed on the
camera's rear screen when the turn indicators are activated:
[ : or [ : ] when neither turn indicator is activated
[- : or [-: ] when the left turn indicator is activated
[ :-] when the right turn indicator is activated
•
Check that all of the remote control's functions work.
See the user manual on the CD-ROM supplied.
•
Reconnect the battery and switch on the engine
again:
On multiplexed vehicles,
wait for 1 minute
before switching
on the engine, to ensure that the vehicle's computers are
reinitialised properly.
4. Start-up & operating test
Power
Default mode
Image check
Vehicle type
Install
Language
Mute
Loud Mode
Lane alert sound
Left warning point
Vehicle speed
set up
Lane alert on/off
Right warning point
Optilane on/off
Increase
Video Box
sensitivity
Save Video
Check Video Box
Delete
Video Box
Volume down
Volume up
Decrease
Video Box
sensitivity
Beep&Watch
On/off
Power
Default mode
Image check
Vehicle type
Install
Language
Mute
Loud Mode
Lane alert sound
Left warning point
Vehicle speed
set up
Lane alert on/off
Right warning point
Optilane on/off
Increase
Video Box
sensitivity
Save Video
Check Video Box
Delete
Video Box
Volume down
Volume up
Decrease
Video Box
sensitivity
Beep&Watch
On/off
