Valentin DUOPRINT Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 96

background image

DuoPrint Series

Safety Instructions

10.15 Operating

Manual

7

2 Safety

Instructions

The label printer is designed for power supply systems of
110-230 V. Connect the label printer only to electrical outlets with a
ground contact.

Couple the label printer to devices using extra low voltage only.

Before making or undoing connections, switch off all devices involved
(computer, printer, accessories etc.).

Operate the label printer in a dry environment only and do not get it
wet (sprayed water, mist etc.).

Do not operate the label printer in explosive atmosphere and not in
proximity of high voltage power lines.

Operate the label printer only in an environment protected against
abrasive dust, swarf and other similar impurity.

In case of cleaning and maintenance with an open cover, ensure that
clothing, hair, jewellery and similar personal items do not contact the
exposed rotating parts.

The print unit can get hot during printing. Do not touch the printhead
during operation. Cool down the print unit before changing material,
removal or adjustment.

Carry out only the actions described in these operating instructions.
Any work beyond this may only be performed by the manufacturer or
upon agreement with the manufacturer.

Unauthorized interference with electronic modules or their software
can cause malfunctions.

Other unauthorized work or modifications to the label printer can
endanger operational safety.

Always have service work done in a qualified workshop, where the
personnel have the technical knowledge and tools required to do the
necessary work.

There are warning stickers on the label printers that draw your
attention to dangers. Therefore the warning stickers are not to be
removed as then you and others cannot be aware of dangers and may
be injured.

DANGER!

Danger to life and limb from power supply!



Do not open the casing.

«
...
5
6
7
8
9
...
»

Содержание DUOPRINT

































































































Отзывы:

Нет отзывов

Похожие инструкции для DUOPRINT

Бренд: Samsung Страницы: 322

Бренд: Samsung Страницы: 340

Бренд: Samsung Страницы: 349

Бренд: Samsung Страницы: 330

Бренд: Samsung Страницы: 315

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 232

Бренд: Samsung Страницы: 42

SCX-6545N Series

Бренд: Samsung Страницы: 468

Бренд: Samsung Страницы: 196

SCX4521F - B/W Laser - All-in-One

Бренд: Samsung Страницы: 120

JG Titan MKII V2

Бренд: iBox Страницы: 5

Бренд: Lanier Страницы: 3

Бренд: Olivetti Страницы: 78

Бренд: Ricoh Страницы: 4

WorkCentre Pro 90

Бренд: Xerox Страницы: 36

Бренд: Hanin Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды