DuoPrint Series
Function Menu
10.15 Operating
Manual
45
Press key
to arrive the next menu item.
On:
The question referring the customized variable appears once
before the print start at the display.
Auto:
The question referring the customized variable appears after
every printed layouts.
Off:
No question appears at the display. In this case the stored default
value is printed.
Press key
to arrive the next menu item.
On:
The print is effected on both printheads corresponding to the
transferred field attributs.
Off, print to PH1:
The print is effected at the front printhead.
Off, print to PH2:
The print is effected at the rear printhead.
At both operating modes the field attributs are ignored and all fields
are printed on the set printhead.
Press key
to arrive the next menu item.
The backfeed was optimised in the operating modes dispenser
(optional) and tear off. Now, when driving into the offset, the following
label is 'pre-printed' if possible and therefore the backfeed of label is
no necessary and time can be saved.
Press key
to arrive the next menu item.
If the print is stopped at the rear printhead it could come to a small
interruption in the printout. This is shown as a fine white line onto the
label. In order to avoid this matter a value for the minimal retraction
(0 – 1 mm) can be set. At this value the label material is retracted. At
the next print start the free range is overprinted.
Press key
to arrive the next menu item.
By a password several functions can be blocked, so the user cannot
work with them. There are several applications in which the use of
password protection makes sense (see chapter 11.2 Password
Protection, page 88).
Press key
to arrive the next menu item.
On:
If a print order is started without previous definition of label, the
standard label is printed.
Off:
If a print order is started without previous definition of label, an
error message appears in the display.
Customized entry
Colour processing
Backfeed
CMI length
Password
Standard label
