DuoPrint Series
Function Menu
10.15 Operating
Manual
51
Switch on the label printer and the display shows the main menu.
Press key
to access the function menu.
Press key
as long as you arrive the
Ribbon save
menu.
Press key
to select the menu.
Press keys
and
to select the desired ribbon save mode.
Off
Optimisation off.
Standard
Maximum optimisation performance, i.e. there is no
transfer ribbon loss whilst this setting is used (except
for a safety distance of 1 mm so that the print fields
are not printed into one another).
Settings with which this optimisation can no longer
be achieved are not permitted. This applies in
particular to offset printing which can now only set in
the valid range.
Press key
to arrive the next menu item.
Dialog
The printing process is stopped at a suitable position
and the printer waits for further data. As soon as this
data is transferred to the printer, the printing process
continues.
At the end of a print job, the printer remains in the
above position so that a follow-up print job can be
transferred to the printer without any loss of material.
Press the
key to stop the print job. In doing so,
the remaining labels of the print job are completed.
Blank labels are fed into the printer until the last
completed label has passed the front printhead.
Auto
After an adjustable time which can be set under the
menu item
Auto feed delay
, the remaining labels
between the two printheads are printed.
Off
The print is only stopped after complete printing of all
labels. Slow data connections or labels with a long
generating time can lead to a loss of material. In the
dispensing modes is this mode activated
automatically.
Ribbon save mode
Label save mode
