manualshive.com logo in svg

Valcourt FP11 FRONTENAC, Инструкция по установке и эксплуатации

Поделиться
Скачать
Valcourt FP11 FRONTENAC Скачать руководство пользователя страница 5

5 

 

1

 

PART A – INSTALLATION  

1.1

 

Safety Information 

 

CAUTION:

  

NEVER USE GASOLINE, GASOLINE-TYPE LANTERN FUEL, 
KEROSENE, CHARCOAL LIGHTER FLUID OR SIMILAR LIQUIDS 
TO START OR ‘‘FRESHEN UP’’ A FIRE IN THIS FIREPLACE. KEEP 
ALL SUCH LIQUIDS WELL AWAY FROM THE FIREPLACE AT 
ALL TIMES. 

CAUTION:

 

KEEP COMBUSTIBLE MATERIALS AT LEAST 48 INCHES AWAY 
FROM THE FRONT OF THE FIREPLACE OPENING. 

CAUTION:

 

NEVER LEAVE CHILDREN UNATTENDED WHEN THERE IS A 
FIRE BURNING IN THE FIREPLACE. 

CAUTION:

 

NEVER USE GRATE OR ELEVATE FIRE. BUILD WOOD FIRE 
DIRECTLY ON HEARTH.  

CAUTION:

 

DO NOT USE A FIREPLACE INSERT AND OTHER PRODUCTS NOT 
SPECIFIED FOR USE WITH THIS FIREPLACE.

  

CAUTION:   DO NOT OBSTRUCT AIR INTLETS. THIS FIREPLACE NEEDS AIR 

FOR ITS GOOD OPERATION. 

WARNING:

 

THIS FIREPLACE HAS NOT BEEN TESTED WITH A GAS LOG 
LIGHTER. 

WARNING:  DO NOT USE MATERIAL OTHER THAN THOSE LISTED IN THE 

REPLACEMENT PARTS SECTION DURING INSTALLATION AS 
THEY MAY BE SAFETY HAZARDS AND A FIRE COULD RESULT.  

CAUTION:  FOR SAFETY REASONS, IT IS VERY IMPORTANT TO USE A NON-

COMBUSTIBLE MATERIAL FOR THE SURROUND OF THE 
FIREPLACE. IN THAT CASE, A CEMENT-BOARD (DUROCK 
STYLE) IS MANDATORY. FAILING TO RESPECT THIS GUIDELINE 
MAY RESULT IN A FIRE. 

 

Содержание FP11 FRONTENAC

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды