manualshive.com logo in svg

Valcourt FP11 FRONTENAC, Инструкция по установке и эксплуатации

Поделиться
Скачать
Valcourt FP11 FRONTENAC Скачать руководство пользователя страница 37

37 

 

1.3.10

 

Door Adjustment 

 

To adjust screen door 

1.

 

Lift the screen and the glass door completely to the top. 

2.

 

Unscrew one of the two bolts (Detail A) which are located in the lower right corner of the 
screen door (see 

Figure 26

). 

3.

 

Loosen the other bolt (Detail A) to allow adjustments of the door. 

4.

 

Move down the screen door to the bottom. 

5.

 

To adjust, move the door to the left or right as needed. 

6.

 

Without changing the performed adjustment, move up about 6” the screen door. 

7.

 

Tighten the 2 bolts. 

 
To adjust glass door 

1.

 

Move the screen door completely to the top. 

2.

 

Move down the glass door to the bottom. 

3.

 

Unscrew the two bolts (Detail B) which are located in the lower left corner of the door 
(see Figure 26). 

4.

 

To adjust, move the door to the left or right as needed. 

5.

 

Tighten the 2 bolts. 

 

 

Figure 26

 

 
 

Содержание FP11 FRONTENAC

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды