2 947100
VoIP (Voice-over-Internet-Protocol)
Adapters
Valcom’s VoIP adapters provide loudspeaker
paging through the client’s LAN/WAN.
VIP-801, Networked Page Zone Extender,
enables voice access over an IP-based
LAN/WAN. Other VIP-801(s) will allow page
zone extensions anywhere else on the
network.
VIP-811, Enhanced Networked Station Port,
connects to an FXO port, loop start trunk port,
or dedicated analog telephone terminal
device, and is connected to an IP-based
LAN/WAN.
VIP-821, Enhanced Networked Trunk Port,
allows a PBX system device or IP telephone
adapter to be connected to a managed
IP-based LAN/WAN. The PBX system device
or IP telephone adapter must provide an open
loop disconnect signal.
Up to 1024 zones are possible using a
VIP-801 unit per zone for audio output.
Dimensions
V-1094A:
4.44"H x 2.75"W x 2.88"D
(11.28cm x 6.99cm x 7.32cm)
V-9937:
8.20”H x 4.55”W x 2.30”D
(20.85cm x 11.56cm x 5.84cm)
V-2000A:
7.75"H x 5.8"W x 2.6"D
(19.69cm x 14.73cm x 6.6cm)
V-2001A:
7.09"H x 9.0"W x 2.4"D
(18.0cm x 22.86cm x 6.1cm)
V-2003A:
7.13"H x 10.00"W x 3.00"D
(18.1cm x 25.4cm x 7.62cm)
V-2006A:
10.9"H x 13.00"W x 2.69"D
(27.7cm x 33.0cm x 6.83cm)
V-2924A:
17.5"H x 10.3"W x 3.06"D
(44.45cm x 26.26cm x 7.77cm)
V-2925A:
17.5"H x 8.37"W x 3.06"D
(44.45cm x 21.26cm x 7.77cm)
V-2926:
5.3"H x 3.0"W x 1.1"D
(13.46cm x 7.620cm x 2.79cm)
V-2928:
5.3"H x 3.0"W x 1.1"D
(13.46cm x 7.620cm x 2.79cm)
V-1109RTVA:
7.13"H x 5.9"W x 2.13"D
(18.11cm x 14.99cm x 5.41cm)
VIP-801:
1.38”H x 6.20”Wx 5.31”D
(3.50cm x 15.75cm x 13.49cm)
VIP-811:
1.38”H x 6.20”Wx 5.31”D
(3.50cm x 15.75cm x 13.49cm)
VIP-821:
1.38”H x6.20”Wx 5.31”D
(3.50cm x 15.75cm x 13.49cm)
Environment
Control Units:
Temperature
0 to +40 degrees C
Humidity
0-85%
non-precipitating
Inside Speakers:
Temperature
-20 to +55 degrees C
Humidity
0-95% non-Precipitating
Horn Speakers:
Temperature
-20 to +55 degrees C
Humidity
0-95%
non-precipitating
Control Unit Power Requirements
*VPU = Valcom Power Unit
VIP Power: VIP units are IEEE 802.3af
compatible, class 3 devices. If Power over
Ethernet (PoE) is not available, the VIP-801 / 811
/ 821 can be powered by a VIP-324D power
supply.
Table 1
Control Unit
"A" Battery
"B" Battery
VPU *
V-1094A - 50
mA
-1
V-2000A
Supplies 600 milliamps,
filtered
+12
V-2001A
Supplies 1 Amp, filtered
+20
V-2003A
Supplies 1.Amp, filtered
+20
V-2006A
Supplies 1.5 Amp, filtered
+30
V-2924A/V-
2925A
A. C. Line Powered
0
V-1109RTVA
60 mA
250 mA
-6
V-9937
- 200mA
-4
VIP-
801/811/821
See VIP power note below
0
