3 947100
One-Way Self-Amplified Speaker
Styles
Valcom One-Way Self-Amplified Speakers are
available in many styles to accommodate virtually
any environment. Please refer to our complete list
of speakers and options on our website at
www.valcom.com.
Our styles include:
Wall
Speakers
Surface or Flush Mount
Woodgrain or Paintable Metal
Slimline
style
Corner
Mount
Double-sided
style
Vandal-Resistant
Pendant
Speakers
Track Mount Speakers
Ceiling
Speakers
With or without LED
P-Tec for tile ceilings
2x2 Lay-In with Backbox
Desktop
Speakers
Desktop or Wall Mount
Push Button Call Switch
Doorplate / Intercom Speakers
Flush Mount style
Brass, Steel or Vandal-Resistant
Surface Mount style
Call Activity LED Indicator
Horns
Water-resistant
Explosion-Proof
Flexhorn
Backboxes
available
SYSTEM DESIGN
1A2, Dedicated Single Line Set, E-Key,
or PABX Paging
Telephone
System C.O.
Loop Start
Trunk Port
Valcom
Page
Control
Unit
T
R
Additional
Zones
(multi-zone
units only)
Speakers
Power Suppl y
(if required)
- and/or -
One or more dedicated
single line telephone(s)
DIAGRAM 1
Block Diagram for Loop Start Trunk Port and/or Single Line
Telephone Access of a Valcom Page Control/Interface
To provide one-way paging on 1A2, E-Key PABX
Systems, or from one or more dedicated single
line telephones, you will need a page control unit,
one-way amplified speaker assemblies, and
possibly a power supply. In most cases, page
access will be via a line button for 1A2, a loop
start trunk port for a PABX or Electronic Key or via
Tip and Ring on a singe line telephone(s).
The control units may be any of the following.
1 zone
V-2000A
1 zone
V-2001A
3 zones w/all call
V-2003A
6 zones w/all call
V-2006A
9 zones w/all call
V-1109RTVA
24 zones w/all call*
V-2924A
*24 zone expansion
module ( up to 96
total)
V-2925A
The speakers may be any Valcom amplified
speaker or horn. The quantity of speakers
required depends on several factures including
the type of speaker and the environment it will be
used in. Please refer to the Installation section of
this document for details.
Power unit requirements for all Valcom speakers
are listed with each speaker model on the Valcom
website. Please refer to www.valcom.com for
specific power requirements for each style of
speaker.
Valcom Power Units
Each page control/interface, speaker and
peripheral device has been assigned a Valcom
power unit (VPU) value. Products that provide
power, such as the 2000 Series page
control/interfaces or power supplies, have power
unit values indicated with a plus (+) sign.
Products that consume power have power unit
values indicated with a minus (-) sign. Products
that neither require nor provide power are
indicated by a VPU of zero (0).
After you have chosen the page control interface,
speakers and accessories for your application,
simply add up all of the Valcom power units
[indicated by a minus (-)] for each item that
requires power. This total tells you how much
power you need. If you have chosen a 2000
Series control/interface, subtract the total power
units provided by this controller from your
previous total. If you come out even, or you have
power left over, you paging system is complete.
However, if you come out with more VPUs
required than provided, you will need additional
power. The additional power required will be
provided by adding one or more VALCOM power
supplies as listed in Table 2.
