VALCO MELTON MCP-4J, Руководство пользователя

Страница: 169 / 213

Valco Melton 23
IS0368 MCP-4J Quick Start Guide
Password Levels
There are five password levels:
Level 0: Protected Level 0: Protected Level 0: Protected Level 0: Protected Level 0: Protected
When the unit is set to Level 0, only basic pattern settings can be
entered or changed. Level 0 provides the ultimate safety settings to
prevent unauthorized and/or accidental changes. This level can be
set as the “Default” level by someone with a Level 2 (Supervisor)
password.
Level 1: Operator Level 1: Operator Level 1: Operator Level 1: Operator Level 1: Operator (No password required)
This is the “Default” level of operation when the unit is first turned on
(unless the “Default” setting has been changed to Level 0 by a
Supervisor). Level 1 allows Operators to set patterns, pressures,
load jobs, and enter basic parameters necessary to run jobs.
Level 2: Supervisor Level 2: Supervisor Level 2: Supervisor Level 2: Supervisor Level 2: Supervisor (Default Password = 1234)
This is the highest user password level. At this level, the “Default”
password level can be set, individual valve settings can be viewed
and changed, jobs can be saved (as well as loaded), and the
memory can be backed up. The Level 2 password can be changed
(this is explained under the heading “Level 2 Password Options”).
Level 3: Service Level 3: Service Level 3: Service Level 3: Service Level 3: Service
This password level is reserved for Authorized Service Personnel.
Level 4: Programmer Level 4: Programmer
Level 4: Programmer Level 4: Programmer Level 4: Programmer
This password level is reserved for Factory Programmers.
Level 2 Password Options
A Level 2 Supervisor has the ability to place the unit into the Protected
Level Mode (Level 0) and to change the Level 2 password.