VALCO MELTON EC4, Руководство пользователя

Страница: 35 / 87

MUS033202 18/10/2010
VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA
TEL: +34 948 321580 Fax: +34 948 326584 melton@melton.es www.valcomelton.com
30
Comp. Name Description
1 Standby LED Green when the unit is on and orange when in
Standby mode.
2 Standby Button Puts the unit in or out of Standby mode.
3 Tank Zone LED Green when the tank is warming and red when
there is an alarm.
4 Hose Zone LED Green when the hose zone is on and red when
the zone is on alarm.
5 Gun Zone LED Green when the gun zone is on and red when
there is an alarm.
6 System Ready LED Green when the system reaches the
programmed temperature.
7 Alarm LED Red when an alarm goes off.
8 More Button Increases the value of the selected parameter
9 OK Button Enter or exit a screen where the selected field
can be edited
10 Right Arrow Button Moves to the right through editable fields on the
selected menu
11 Less Button Decreases the value of the selected parameter
12 Left Arrow Button Moves to the left through editable fields on the
selected menu
13 Settings Screen Displays the menu screens
14 Configuration Button Displays the configuration screens
15 Configuration LED Green when the equipment enters the
configuration screen
16 Temperature Button Displays the temperature screens
17 Temperature LED Green when the equipment enters the
temperature screen
18 Release Control Button Disabled
19 Release Control LED Disabled
20 On/Off
Cooling/Regression
Button Puts the equipment in or out of
Cooling/Regression mode. (This mode reduces
the temperature so that the adhesive stays soft,
but not melted when not in operation so it
doesn’t overheat)
21 On/Off
Cooling/Regression LED Yellow when the unit is in Cooling/Regression
mode.
22 Clock On/Off Button Turns the timer function on or off
23 Clock On/Off LED Green when the timer function is activated.
4.2.3.2 On/Off Switch and Standby Mode:
The On/Off switch is at the bottom of the front casing (see photo).