VALCO MELTON D4-E Скачать руководство пользователя | Manualshive

Страница: 8 / 103

background image

MM101 – D-4E HOT MELT UNIT

8

VALCO MELTON S.L.U. Pol. Ind. Agustinos C/G 34 3116 0 ORCOYEN, NAVARRA

TEL: +34 948 321580 Fax: +34 948 326584 [email protected]

www.valcomelton.com

SECTION 2 - SAFETY INFORMATION

General
Information

It is the purchaser’s responsibility to ensure that all local, county, state, and
national codes, regulations, rules, and laws relating to safety and safe
operating conditions are met and followed.

The best safeguard is trained personnel. The purchaser is responsible for
providing personnel who are adequately trained to install, operate, and
maintain components and systems.

This section contains information that is essential to the safety of personnel.
Safety information is included throughout the rest of the manual as well.
The following safety conventions are used to indicate potential safety
hazards.

Warning!

This symbol indicates the presence of un-insulated
dangerous voltage within the product’s enclosure. This
voltage may cause electrical shock or fire. FAILURE TO
OBSERVE WARNING MAY RESULT IN DEATH,
PERSONAL INJURY, AND/OR EQUIPMENT DAMAGE

Warning!

This convention is used to alert the user to important
installation, operation, and/or maintenance information.
FAILURE TO OBSERVE WARNING MAY RESULT IN
DEATH, PERSONAL INJURY, AND/OR EQUIPMENT
DAMAGE.

Caution!

This convention is used to alert the user to important
installation, operation, and/or maintenance information.
FAILURE TO OBSERVE CAUTION MAY CAUSE
EQUIPMENT DAMAGE.

Warnings

All personnel involved with the installation, operation, and maintenance of
the equipment must read and thoroughly understand the following
warnings:

Warning!

Disconnect all power before opening the control
OTHERWISE, DEATH OR PERSONAL INJURY COULD
OCCUR. Only qualified personnel should open and service
the control.

Warning!

Promptly repair or replace all worn or damaged electrical
wiring and equipment wires. OTHERWISE, DEATH OR
OCCUR. Only qualified personnel should open and service.

«
...
6
7
8
9
10
...
»

Содержание D4-E








































































































Отзывы:

Нет отзывов

Похожие инструкции для D4-E

Бренд: Panasonic Страницы: 6

Бренд: Clarke Technology Страницы: 54

SONIC DUO SP600Q

Бренд: Shark Страницы: 20

Бренд: Duplo Страницы: 90

Бренд: Powr-Flite Страницы: 4

Бренд: Fellowes Страницы: 105

PhoneMate TC-520

Бренд: Casio Страницы: 40

MICROMAG 17'' DISK PAD ASSIST

Бренд: RPS Страницы: 38

Бренд: Advance acoustic Страницы: 12

Бренд: Advance acoustic Страницы: 38

Бренд: Muratec Страницы: 91

Бренд: Kärcher Страницы: 240

Бренд: JUKI Страницы: 187

Бренд: Pop-A-Shot Страницы: 15

Бренд: MBM Страницы: 14

Бренд: Singer Страницы: 32

Бренд: Tornado Karcher Страницы: 53

Бренд: SereneLife Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды