background image

Using the harness

Your child MUST always be harnessed while in the stroller.

FIGURE U

TO OPEN YOUR HARNESS:

49. Push down on both buckle prongs and hold.

50. Simultaneously press the release button in the centre of the 

buckle.

51. Lift the buckles from the buckle housing.

ThIS PROCESS MAy bE DIFFICULT AS yOUR bUCkLE SySTEM hAS 

bEEN DESIGNED TO MEET vERy STRINGENT SAFETy STANDARDS 

AND ENSURE ThAT A ChILD CANNOT RELEASE ThE hARNESS 

UNAIDED.

TO SECURE YOUR CHILD IN THE 

HARNESS:

FIGURE V

52. Overlap buckles  so that they fit 

together to form one complete buckle.

53.  Insert the completed buckle into the 

buckle housing until it engages securely 

in place.

zip-in accessOries

Your Twin Runabout hoods are fitted with 

zips to which attaches our unique zip-in 

accessories.

FIGURE W

1. Align the centre of the mesh above both 

open hoods, ensuring that the zip ends 

are in the correct position as shown 

in (a).

2. Run the zips all the way across each 

hood arches for the mesh to fully cover 

the front end.

3. Secure the front edge of the insect 

mesh by fastening the studs under the 

footplate as shown in (b).

4. Having individual zip openings on each side of the stroller, the 

insect mesh can be opened by pulling on either side of the 

seat respectively. 

tether strap

Your stroller has been 

equipped with a safety 

tether strap. This strap 

has been designed to 

always keep your stroller 

within constant reach. 

IMPORTANT: ALWAyS 

SLIP ThE LOOP IN ThE 

STRAP SECURELy OvER 

yOUR WRIST WhENEvER 

A ChILD IS IN yOUR 

STROLLER.

airgO™

Your Twin Trimode 

has been designed 

to maximise air flow 

within the stroller by 

way of our exclusive 

Airgo™ system. This 

is a unique system 

in our hood skirt. This incorporates a zip-off bag which 

reveals a mesh air vent, which allows additional air flow for 

your child’s comfort. The bag can be hung from the stroller 

handles.

a

b

U

V

W

Uv PROTECTIvE INSECT NET

Our unique insect net zips directly in to the inside of your Tri Mode hood. 

In addition to keeping baby cool, comfortable and safe from insects, it 

also blocks up to a massive 80%* of the sun’s harmful UV rays.

(* tested to Australian Standard 4399)

Содержание TRIMODE









Отзывы: