background image

Using yOUr brakes

FIGURE Q

36. To engage: Press down on the centre pedal until the brake pins 

engage in the nylon brake cogs in the wheel hub.

IMPORTANT: ALWAyS ChECk ThAT ThE bRAkE hAS ENGAGED 

bEFORE USE, IF NOT yOU MAy NEED TO MOvE ThE STROLLER 

FORWARD OR bACk SLIGhTLy UNTIL IT LOCkS INTO PLACE.

37. To disengage, lift the centre pedal upward till it locks in the 

upright position.

FOlding the strOller

FIGURE R

38. Fold the hood back up against the handle.

39. Release the locking clamps at either side of the stroller.

40. Simultaneously lift the secondary safety catch (located at the 

left hand side of the stroller while standing behind) and swing 

the handle forward.

FIGURE S

41. Holding the rear legs at both sides, press down with 

your foot on the rear basket tube. This will disengage the 

basket frame locking hinges.

42. Continue pushing the rear of the basket, moving the 

rear wheels forward beneath the frame.

43. You can lock the frame closed by stretching each 

locking strap (located at either side of the chassis) 

over the frame, placing each catch over the rivet on the 

chassis.

Opening the strOller

FIGURE T

44. To open, unlock each locking strap by pushing 

downward in the catch till it disengages from the rivet 

head.

45. HINT: if the strap is too tight to release, push the 

handle bar downward to assist in fastening and 

releasing the locking strap. 

46. With your foot on the inside of the rear wheels, 

stopping them from moving, lift the handle upwards. (This will 

open the chassis and begin to move the rear wheels away from 

the front wheels.)

47. Press down on the basket frame locking hinges to lock the 

frame in the open position.

48. Secure the handle to the frame by engaging 

the locking clamps on both sides.

IMPORTANT WARNING: ALWAyS TEST ThAT ALL 

AXLES, WhEELS, FRONT bAR, hINGES AND LOCkS 

ARE SECURELy ENGAGED bEFORE USE.

Q

R

44

45

S

T

Содержание TRIMODE









Отзывы: