M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
10
KEY ON/OFF: This key is used to test the solenoid valves.
LEDs :
IN: Indicates photocells activation.
OUT: Indicates solenoid valves activation.
READY: Indicates test valves.
4.3. GENERAL PARAMETERS CP-40:
System Programming Menus:
For choosing the working menu, press the key
. When the wanted
menu is displayed press
.
Once the wanted menu is entered, use key
for moving among the
parameters and
to change the value of the parameter. Press
to validate the new value.
Press
Esc
to exit the menu.
The available menus are:
•
Job data
•
Format data
•
Test Valves
•
Reset counter
•
Configuration
4.3.1 Job data Menu:
This menu displays the active format, the number of cycles made since
the last reset and the line speed in m/min.
Format: XX No. XXXXXX
Speed: XXX m/min.
Format: XX No. XXXXXX
Timer = 60 m/min.
4.3.2 Format data menu:
When entered it displays the following parameters:
