M007502200
12/07/2007
MELTON, S.L. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail:[email protected] http://www.melton.es
9
4.2.2. Description of the CP-40 control panel:
Esc
4
2
3
1
2
1
CP - 40
PARAMETER
ON/OFF
ESCAPE
DOWN
UP
ENTER
READY
IN
OUT
Keyboard:
The CP- 40A has six control keys that allow access to the programming
menus and general operating functions:
KEY ESCAPE: Exit the menu.
KEY PARAMETER:
KEY UP: This key is used to change the format number and parameter
and time values.
KEY DOWN: The same as key UP but in ascending order.
KEY ENTER: The ENTER key is used to validate the data modified in the
programming modes. In operating mode, it is not operative.
To validate a programming value, the ENTER key must be held
down until the display blinks (approx. 0.5 s), which is when the
value will be recorded in the non volatile memory.
If the ENTER key is not held long enough, the value is not
recorded and the previous one remains valid. This prevents
accidental changes in programming.
Esc
