VALBERG WF 914 B S180C, Инструкция по эксплуатации

Страница: 32 / 218

25 EN
Using the appliance
B
Selecting additional functions
• In standby mode, press the "Options" button to select an additional function to be added to
the current program. Select only one function with each press. The corresponding icon starts
flashing. After launching the program, it can no longer be modified.
Prewash
• Select this function to start the pre-wash cycle in order to boost the cleaning effect and
remove the toughest stains. This function is suitable for heavily soiled clothes.
• Before starting the cycle, you can add washing products to the pre-wash compartment and
you must put some in the main wash compartment.
Intensive
• This function extends the washing time, to wash in greater depth and to remove stains
more effectively.
Extra rinse
If you select the extra rinse function, the machine will start the rinsing process again before
switching to the softener program and the total running time of the cycle will increase
accordingly.
Water inlet warning
• If the water inlet tap is not open or the water pressure is too low, you will be alerted by the
water inlet error icon and the error code "F01" appearing on the display.
Water drainage warning
• If the hose is kinked, the water will not drain smoothly. If it cannot fully drain the water for a
long time, the drainage error icon will appear and the display will show the error code "F03".
Door lock icon
15
20°C
• Once the program has started, the Door Lock icon will light up and the door will be locked.
• At the end of the program, the door is automatically unlocked. In standby mode, if the
conditions are suitable for opening the door, it will unlock and the corresponding indicator
lights up.
• When the door lock indicator light flashes, it means that the door
cannot be opened by force. This is to prevent injury.