VALBERG WF 914 B S180C, Инструкция по эксплуатации

Страница: 46 / 218

39 EN
Useful information
C
• The position of the separator in the main wash compartment is suitable for the use of
washing liquid or powder (see Washing Product section).
The machine vibrates during the spin cycle. Check that:
• The washing machine is correctly levelled and is resting correctly on its four feet;
• The transit bolts have been removed. Before using the machine, the transit bolts must be
removed.
The final spin is not producing satisfactory results.
• The washing machine is fitted with a system for detecting and adjusting unbalances.
If heavy clothing (e.g. : bathrobes) is placed in the washing machine, the system is able to
automatically adjust the spin speed or even stop a spin cycle, that has begun, if it detects an
unbalance that is too high. This is to protect the appliance.
• If the laundry is still too wet at the end of the cycle, remove some items and restart the
spin cycle.
• Excessive foam can prevent the spin cycle. Use a suitable amount of detergent.
• Check that the Spin mode speed selector has not been set to "0".
If the washing machine has a time display: the duration of the program initially displayed
is increased/decreased by time intervals:
This is normal and allows the machine to automatically adjust the duration of the program
depending on various factors e.g. :
• Excessive foam;
• Load unbalances due to the presence of heavy items;
• Longer heating times due to the low temperature of the inlet water.
In view of these factors, the remaining duration of the program is recalculated and adjusted
as necessary. What's more, during the filling phase, the washing machine works out the load
level and, if necessary, adjusts the initially displayed program duration accordingly. During
these updates, an animation scrolls across the duration display.