VALBERG 14S42 D WAD929C, Инструкция по эксплуатации

Страница: 21 / 118

38 39 EN EN
Useful information Useful information
C C
forming inside.
Disconnecting the plug
• Always remove the plug from the socket before cleaning or
servicing.
Do not clean with solvents or abrasive substances
• Do not use solvents or abrasive cleaning agents to clean
the exterior and rubber parts of the dishwasher. Use only a
cloth with warm soapy water.
• To remove stains or dirt from the interior surface, use a
cloth moistened with water and a little vinegar, or a cleaning
product specially designed for dishwashers.
In case of prolonged disuse
• We recommend that you perform a no-load wash cycle,
then disconnect the plug from the socket, turn off the water
supply, and leave the appliance door ajar. This will help the
door seals last longer and prevent odours from forming
inside the appliance.
Moving the machine
• If you need to move the unit, try to keep it in an upright
position. If necessary, you can lay it on its back.
Seals
• One of the factors contributing to the formation of odours
in the dishwasher is the presence of food residue stuck in
the seals. Regular cleaning with a damp sponge will prevent
this from happening.
General maintenance of the dishwasher
Precautions against freezing
• In winter, you should take measures to protect your
dishwasher from freezing. After each wash cycle, please
follow the procedure below:
1. Switch off the power to the dishwasher at the source.
2. Turn off the water supply and disconnect the water supply
hose from the water tap.
3. Drain the water from the inlet pipe and tap. (use a bucket
to collect the water).
4. Reconnect the water supply hose to the tap.
5. Remove the filter at the bottom of the tank and use a
sponge to soak up the water in the settling tank.
After each wash
• After each wash, turn off the water supply to the appliance
and leave the door ajar to prevent moisture and odours from