VALBERG 14S42 D WAD929C, Инструкция по эксплуатации

Страница: 12 / 118

20 21 EN EN
Using the appliance Using the appliance
B B
WATER HARDNESS
Setting
the water
softener
Salt
consumption
(grammes/
cycle)
German
degrees °dH
French
degrees
°fH
English
degrees
°Clark
Mmol/l
0 - 5 0 - 9 0 - 6 0 - 0.94 H1 0
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2 9
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3 12
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4 20
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5 30
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6 60
1 °dH = 1.25 °Clark = 1.78 °fH = 0.178 mmol/l
Factory setting: H3
Contact your local water company for information on the hardness of your water.
NOTE : Please refer to the chapter “Loading salt into the
water softener”, if your dishwasher runs out of salt.
NOTE : If your model does not have a water softener, you
can skip this section water softener.
• Water hardness varies from place to place. If hard water
is used in the dishwasher, deposits will form on dishes and
utensils. This appliance is equipped with a special softener
that uses a salt compartment specifically designed to
remove limescale and minerals from the water.
Preparing and loading dishes
• Consider buying utensils that are labelled “dishwasher safe”.
• For delicate items, select a programme with the lowest possible temperature.
• To avoid damage, do not remove glasses and cutlery from the dishwasher immediately
after the programme has finished.
10
Screen
Displays remaining time, waiting time, error codes, etc.
11
Warning indicator
Rinse aid
If the “ ” indicator lights up, it means that the rinse
aid level in the dishwasher is low and the rinse aid
compartment needs to be filled.
Salt
If the “ ” indicator lights up, the dishwasher is low
on salt and a refill is required.
Water tap
If the “ ” indicator lights up, it means that the tap is
shut off.
Water softener
• The water softener must be adjusted manually, using the water hardness indicator.
• The water softener is designed to remove minerals and salts from the water that would
have a harmful or undesirable effect on the operation of the appliance. The higher the
mineral content of your water, the more calcareous it is.
• The softener should be adjusted according to the hardness of the water in your area. Your
local water authority can give you information on the hardness of the water in your area.
Setting the salt consumption
• This dishwasher is designed to allow the amount of salt used to be adjusted according to
the hardness of the water. This helps to optimise and adapt the level of salt consumption.
• Please follow the steps below to set the salt consumption:
1. Turn on the machine.
2. Within 60 seconds of powering up the appliance, press the "Programmes" button for more
than 5 seconds to enter the water softener setting mode.
3. Press the "Programmes" button to select the correct setting for your local environment.
The order in which the settings are displayed is as follows:
H1 -> H2 -> H3 -> H4 -> H5 -> H6.
4. Press the power button to exit the setting function.