Rev. 1.2
２．General Description
VLC-1230-4 are a controller for VAL series or LED lighting unit made by VS Technology (Thailand) Co., Ltd.
It can be used with input voltage range with DC12V and output wattage maximum totally 30W with 1CH and 2CH and
3CH and 4CH. There are four independent output channels and each channels can be controlled separately.
Remote control is also available separately in each channels.
３．Confirming package contents
Item
Q’ty
Main unit
1
This operation manual
1
４．Specification
Model
VLC-1230-4
Input Voltage
DC 12V (rated) ±10% 50/60Hz
Power Consumption
DC 12V/3A
Rated output voltage
4 Channels DC12V (between output and GND)
Rated output current
2.5A (Total for 4 channels)
Input Connectors
DC input 3M round crimp terminal is are recommend to connect to the terminal block
Output Connectors
SMP-02V-BC (JST) 1:output＋ 2:output－
Insulation resistance：500MΩ(min.) Withstand voltage：AC1500V/minute
External control connectors
Trigger input MIL connector (MIL-C-83503 compliant), 10-pole
For setting the light intensity and lighting mode: e-CON 3-pole
Intensity Control
INT.: Control manually by volume knobs
EXT.: Remote control by external EIA-232-D
Strobe Control
NOR.: The lights are always ON.
STR.: Strobe control.
Lighting method
PWM (100KHz)
Overcurrent protection
Operates at 105% or higher of the rated current
Operating Environment
Temperature： 0 to 40℃ Humidity： 20～85% RH without condensation
Altitude： 2000m Max. Pollution level： 2
Protective ground classⅠ Installation category Ⅱ（restricted to use in indoor environment）
Storage Temperature/ Humidity
-15 to 40℃／20 to 85% RH without condensation
Cooling Method
Natural air cooling
Dimensions
W115mm x D40mm x H114mm
Weight
Approx. 445g
Environmental regulations
RoHS compliant
European Standards
(CE Marking) *Under processing
EN55011:2009 +A1:2010
EN61000-6-2:2005