VAL VLC-1230-4 Скачать руководство пользователя страница 10

Rev. 1.2 

 

9.Optional Accessories 

*External Control Cable 
Model: VL-EXCB1-3 
Connector: XN2A-1470 (Manufactured by OMRON) 

 

*External Trigger Input Cable 
Model: VL-EXCB2-3 
Connector: XG4M-1030-T (Manufactured by OMRON)

 

 

10.Warranty 

・Duration of warranty 
  The duration of the product warranty shall be two years from the day of product delivery. 
 
・Extent of warranty 

      If a fault or defect attributable under normal use during  the warranty period, VS Technology (Thailand) Co., Ltd. will in good faith ship 

a  replacement or repair the defective part of the product  free of charge. 

  ○  Faults or damage that occur due to conditions, environments, handling, or usage other than those described in the Instruction 

Manual and specifications. 

  ○  Faults or damage that occur due to modification of  structure, performance, specifications, etc., by customers after the day of 

product delivery. 

○  Faults or damage that occur due to use of the product  other than for its designed purpose. 

  ○  Faults or damage that occur due to natural or human causes such as saltwater air damage, gas damage, earthquakes, floods, fire, 

lighting or armed conflicts. 

 

・Disclaimer 

  VS Technology (Thailand) Co., Ltd. shall not be responsible for any appendant damaged for example business interests cost or abort of 
business.   
 

≪Note≫ 

・If there are any unclear points or if you have any questions, please feel free to inquire VS Technology (Thailand) Co., Ltd. 
  For repair or after sales service, please contact any VS Technology (Thailand) Co., Ltd. office or the sales representative where you 

have purchased the unit. 

・Please provide us with the following information when requesting service. 
  Model Name 
  Serial No.: 
  Date of purchase:        .    .    . 
  State of trouble:Please provide detailed information 

Your name, address, telephone number, email-address 
 
 
 
 
 
 
 
 
 
 
 
 
 

                                                                 

Содержание VLC-1230-4











Отзывы: