Vaisala MI Скачать руководство пользователя страница 87

Страница: 87 / 92

B Software licence

This software includes parts of software libraries included under the following licence

notices.

Redistribution and use in source and binary forms, with or without modification, are

permitted provided that the following conditions are met:

•

Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.

•

Redistributions in binary form must reproduce the above copyright notice, this list

of conditions and the following disclaimer in the documentation and/or other ma-

terials provided with the distribution.

•

Neither the name of the <organization> nor the names of its contributors may be

used to endorse or promote products derived from this software without specific

prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS

IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AARON GIFFORD BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SER-

VICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,

OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Содержание MI






















































































Результаты поиска

Содержание MI

Отзывы:

Похожие инструкции для MI

Бренды по названию

Популярные бренды

Vaisala MI, Инструкция по эксплуатации

Результаты поиска

Содержание MI

Отзывы:

Похожие инструкции для MI

Бренды по названию

Популярные бренды