Vaisala MI, Инструкция по эксплуатации

Страница: 23 / 92

4 Use
15
© Copyright Vaisala 2019. All rights reserved.
4 Use
Power up the Multichannel user interface MI. A startup display with a progress bar is
shown for approximately one minute, then the Main display appears.
The MI is operated by tapping the touch screen. To get access to the MI touch screen,
open the enclosure door.
Note: If you find that the touch screen is difficult to use with fingers, try tapping it
with e.g. the blunt end of a pen or use a fingernail instead of the whole fingertip. The
screen works even when you are wearing gloves.
4.1 Main display
The main view can show up to four application windows at the same time. You can
access measurement data and system settings via the Main display.
Tap anywhere
in the application
window to access
measurement
Tap for second
main view screen
Tap to access
system settings
Figure 4.1 Accessing measurement and system settings via Main display
The Main display setup is controlled via Settings > General . Display mode and display
language are chosen in drop-down menus, tap the little triangle to see the whole menu.
If you only have one application (usually a single refractometer), One maximized will
make the most of the display. Dual vertical allows you to see two application, Quadrant
and One on top shows up to of four applications at the same time. Note: If you have
three applications and choose One maximized , you’ll only see one application, but the
other two will continue to run in the background.