Vaisala AWS310-SITE, Руководство по настройке и обслуживанию

Страница: 30 / 176

4. In Miscellaneous , set the following:
PDF reader path
Select Browse to define the location of the PDF reader on the workstation on
which AWS Client is installed. The AWS Client help file is in PDF format and needs
a PDF reader.
Trace log directory
Select Browse to define the location of the trace log files which store the
information sent by the QML data logger during a terminal session. You can, for
example, log your commands and the responses given by the QML data logger
for troubleshooting purposes.
Trace log on
Select to create a trace log.
Sleep commands enabled
Select to enable the use of the sleep and wakeup commands on the QML data
logger.
Send Close before Open
Select to force AWS Client to always send the close command before attempting
to open a service connection.
Secure setup upload
Select to use a secure procedure when uploading the setup. Although the secure
setup upload takes longer, it is recommended especially when uploading setups
over an unreliable connection.
Terminal line wrap
Select to wrap overlong lines onto the next line in the terminal window.
Command line length
Type a value to modify the maximum length for a command sent from the
command line to the QML data logger. The default value is 80 characters. You can
reduce the value, but it must match the value specified in the setup file. For URL
settings, the value may have to be higher than 80 characters.
Reset timeout (seconds)
Type a value to modify the maximum wait time before the logger executes a
reset.
GSM Modem PIN
Type a new PIN to modify the PIN code for the GSM modem SIM card.
F1 ... F12
Type the frequently used QML data logger commands in the function key fields
(F1 … F12). You can use the function keys on your keyboard as shortcuts to the
commands.
Example:
sysinfo <CR> (the command ends in a carriage return)
5. To save the changes, select Save .
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
28