Vaillant flexoTHERM exclusive, Инструкция по установке и обслуживанию

Страница: 43 / 80

0020213394_05 Installation and maintenance instructions
43
Setting level Values Unit Increment, select, ex-
planation Factory setting Setting
Min. Max.
Build. pump starts Current value
Environ. pump hours Current value h
Environm. pump starts Current value
4-way valve hours Current value h
4-way valve switch. Current value
Fan 1: Hours Current value h
Fan 1: Starts Current value
De-icer 1: Hours Current value h
De-icer 1: Switch. Current value
Fan 2: Hours Current value h
Fan 2: Switchings Current value
De-icer 2: Hours Current value h
De-icer 2: Switch. Current value
Cooling mixer steps Current value
EEV stepsEl. expansion valve
steps Current value
EEV-VI stepsEl. expansion
valve injection steps Current value
VUV DHW switchings Current value
Well pump hours Current value h
Well pump starts Current value
Im. heater pwr cons. Current value kWh
Im. heater switchings Current value
Im. heater op. hours Current value h
Installer level
→
Test menu
→
Check programs
→
P.01 Heating mode Select
P.02 Cooling mode Select
P.03 Hot water handling Select
P.04 Immersion heater Select
P.05 Purge building circuit Select
P.06 Purge environment circuit Select
P.07 Purge environment and
building circuit Select
P.08 De-icing Select
Installer level
→
Test menu
→
Sensor/actuator test
→
Actuators
Building circuit actuators
T.01 Building circuit pump
power 0 100 % 5, off Off
T.02 DHW diverter valve Heating Domestic
hot water Heating, Domestic hot
water Heating
T.03 Cooling diverter valve (for
passive cooling only) Heating Cooling Heating, Cooling Heating
Environment circuit actuators
T.14 Env. circuit pump power 0 100 % 5 0
T.16 Cooling mixer position (for
passive cooling only) Closes Opens Closes, Stops, Opens Stops
T.17 Well pump Off On Off, On Off
1)
See overview of fault codes