Vaillant ecoLEVEL, Инструкция по установке и обслуживанию

Страница: 5 / 24

Safety information and regulations
ecoLEVEL installation and maintenance instructions 0020029316_01
5
2
Material damage caused by unsuitable discharge
pipes
If you use discharge pipes that are not acid-resistant, this
can lead to leaks and damage caused by leaking condensed
water.
>
If you need to extend the condensed water discharge
pipe during installation, use only acid-resistant discharge
pipes.
Earthing, conductor dimensioning, short-circuit
protection
>
The pump connection has a protective connection. Make
sure that the power supply is earthed in accordance with
legal requirements.
Regulations and standards
IEC 60364-7-712 Electrical installations of buildings -
Part 7-712
EMC test procedure in accordance with EN 50081-1:1992,
EN 50082-1:1997
Interference emission: EN 55014-1: 1993
Immunity: EN 55014-2: 1997
Rules of engineering
The installation must suit the conditions at the site of the
customer and comply with local regulations and engineer-
ing rules. In particular, this includes:
– Electrical connection
– VDE 0100 Erection of power installations with rated
voltages below 1000 V,
– VDE 0105, part 100 Operation of electrical systems
DIN 18382 Electrical cable and wiring systems in
buildings