Release 1.2
34
1.
Star Commands
– Star Commands for
PhoneBook Function
(Default is
*50
) is
programmable in this page. The format is “*”+digits and the number of digits is not
limited. However, the detection is based on the first match. For example, if “*1” is
defined, then the definition of “*1x..” is possible but will not be detected as a star
command.
Star command for
Call Transfer
and
Call Hold
are preset by the factory and cannot be
changed. Please refer to Section 3 for more information.
2.
FXS 48V Standby
– Normal FXS on hook line voltage is 24V. Enable this option to
change the on hook line voltage to 48V.
3.
Billing Support
– Enable this option to enable call records to be sent to our Billing
Server for billing purpose. Please contact your provider for more information on this.
4.
Ring Parameters
– The ringing frequency and cadence at the FXS port can be set here.
It allows settings of 3 ringing cadences per ring cycle.
5.
Caller ID
– This defines the Caller ID signal to be sent from the FXS port. It supports
both Bellcore/Telcordia and ETSI FSK Caller ID standards. The CID FSK Mode sets
up the FSK modem to be used: Bellcore for Bell 202 and ETSI for V.23. Please refer to
the Caller ID standard desired for further information.
6.
Hot Line
– When this feature is enabled, the Hot Line Number defined will be dialed out
automatically whenever the phone is off hook.
www.vaidsys.ru
HT-842 User Manual