Release 1.2
19
3.
PPPoE
– This selection is intended for broadband connection (ADSL / Cable
modem) that requires dial up / authentication using PPPoE protocol. Both
User
Name
and
Password
are required. Please consult your service provider for
more information if needed. One advantage with the PPPoE dial up is that the IP
address obtained for the LAN port is normally a public IP.
More advanced parameters for
802.1q VLAN
and
MAC
settings are available.
Please consult your network administrator for assistance if needed.
PC PORT
– The PC port is intended to provide an Ethernet connection to other network
devices (for example: PC, network HUB.). Two modes of operation are available:
1.
Bridge mode
- This mode allows the network traffics at the PC port to be
bypassed to LAN port. This means that the network device share the same
network segment as the LAN port. There is no IP address assigned to the PC
port.
2.
Fixed IP
- This mode sets the PC port
IP Addresss
(private IP) and
Subnet Mask
manually. This creates a new network segment for the network devices
connected to the PC Port.
To simplify network IP assignments, enable the DHCP Server for the PC Port.
This allows network devices connected Port to obtain network IP and related
information from the PC Port. Please consult your network administrator for
proper settings of the DHCP Server
www.vaidsys.ru
HT-842 User Manual
