Release 1.2
16
To change the display language immediately, you can select the language icon as
shown below. However, this does not change the default language.
2
Time Zone
– This parameter specifies your local time zone in order for the
date/time to be correctly displayed since the date/time obtained from a network
time server is referenced to the
Greenwich Mean Time (GMT). If your time
zone is 8 hours ahead of the GMT, you need to enter the value “GMT+8” in this
field.
3
Time Server
– This parameter specifies the location of the network time server for
obtaining the date and time information. It accepts both domain name and IP
address.
4
Auto Provision
– This parameter enables or disables the Auto Provision
procedures. The
Auto Provision
is a batch script to obtain configuration and
firmware upgrade information from a server. Once this option is enabled, two
additional parameters (
Provision Server
and
Provision Interval
) are displayed.
The
Provision Server
specifies the location of the designated provision server.
The auto provision procedure is executed at boot up time and is repeated at a
duration specified in the parameter
Provision Interval
.
5
Remote Control
– This feature is intended for remote technical support and it
enables the device to connect to a remote server. Please contact your service
provider for more information on this feature.
6
Key(#) as Delimiter
– When dialing a VoIP number, the VoIP device needs to wait
for the user to complete the number dialing before the call request is actually sent
to the server. This parameter enables or disables the “#” key to be used to signal
the number dialing is completed and the call request can be execute immediately.
7
Auto-Dial Timeout
– This parameter sets the maximum delay for sending out a
www.vaidsys.ru
HT-842 User Manual
