COMMISSIONING
22
5
COMMISSIONING
5.1
Safety instructions for commissioning
DANGER!
Installation without contact protection - Risk of fatal injuries from electrical current!
Contact with electrically live components may result in fatal injuries.
►
During installation, a protection against personal injury/contact in accordance
with DIN EN 60204-1 must be implemented.
WARNING!
Risk of injury in case of improper operation!
Improper operation may result in serious injury or property damage.
►
Observe the safety instructions from chapter “2 Safety instructions.”
►
Are all acceptance reports available? (initial startup)
►
Are there no people in the danger zones?
►
Was the assembly performed completely according to instructions?
►
Have excess materials, tools and auxiliary devices been cleared from the danger
zones?
►
Have the electrical system powered up by an authorized electrically trained person
(see chapter “2.3.1 Danger from electrical energy”)
WARNING!
Danger to unauthorized persons!
Unauthorized persons who do not fulfill the requirements described here may not be
aware of the hazards in the relevant working areas.
►
Keep unauthorized persons clear of the work area
►
If in doubt, address the relevant person and instruct them to leave the work area
if necessary
►
Interrupt work until unauthorized persons have left the work area
WARNING!
Hazard in case of insufficient qualification of personnel!
Insufficiently qualified persons are unable to judge the risks when working on the sys-
tem, which puts them and others at risk if severe or fatal injuries.
►
All work must be performed by qualified personnel only
►
Insufficiently qualified personnel must stay out of the work area
